Lloydminster, located on the border between the provinces of Alberta and Saskatchewan, faces extreme temperature fluctuations from -40°C in winter to +35°C in summer. The city’s location at 645 meters above sea level and openness to the prairies creates additional stresses in the form of strong winds with an average speed of 19 km/h, which increases heat loss through translucent structures by 23% compared to sheltered areas.
Regulatory requirements and standards
In accordance with the National Building Code of Canada and local codes in both provinces, windows and doors in Lloydminster must meet a minimum heat transfer resistance value of R-5 (U-factor 0.2). All installations must be certified for Climate Zone 2 by the Canadian Standards Association (CSA).
Particular attention is paid to air permeability requirements: the figure should not exceed 0.34 l/s/m² at a pressure of 75 Pa for windows and 0.5 l/s/m² for doors. Municipal regulations of the city require a thermal imaging inspection after installation when the outside temperature is below -15°C.
Greener Homes Loan Program
Get Entry Door for free*
Fall Discount up to 25%
- These are limited time offers. Some offers do not stack. Ask your project manager for details.
Technical solutions for maximum efficiency
Modern triple-glazed windows demonstrate a heat transfer resistance coefficient of up to R-8, which exceeds the minimum requirements by 60%. Krypton-filled glass panes with dual Low-E low-emissivity coatings provide a solar heat gain coefficient (SHGC) of 0.42, optimal for the local climate. Innovative composite spacer frames reduce the linear heat transfer coefficient to 0.04 W/(m-K).
Specialized solutions for door systems
The 60 mm thick polyurethane-filled fiberglass doors provide R-9 heat transfer resistance, which is critical to prevent frost penetration. Multi-point locking systems and thermal break sills reduce air infiltration to 0.1 l/s/m² at 75 Pa. The use of fiberglass-reinforced composites in the door leaf construction ensures geometric dimensional stability at temperature variations of up to 75°C. Special EPDM rubber seals remain elastic down to -45°C, guaranteeing reliable sealing throughout the entire service life.
Features of a professional installation
Proper installation of windows and exterior doors requires consideration of the following factors:
- Use of expansion plates to compensate for thermal expansion.
- Use of special installation materials with an operating range of -50°C to +40°C.
- Mandatory installation of vapor barrier tapes around the perimeter.
- Two-stage sealing using all-season sealants.
- Control of the geometry of openings taking into account seasonal deformations of the building.
- Installation of additional brackets to counteract wind loads.
Cost effectiveness and payback
According to statistics, using energy efficient windows and doors in Lloydminster provides savings of up to 35% on heating costs. At an average heating cost of $2,800 per year, the payback period is 4-6 years. Calculations show that at current energy rates, annual savings for a standard 200m² home can be as high as $980. Investments in energy efficient windows and doors also increase the market value of a property by 3-5% on average, according to local real estate agencies.
Certification and warranties
All Canglow structures we install have valid certificates and special markings. And our warranty includes a 25-year guarantee, meeting the enhanced requirements of both provinces. Each installed element is independently verified to meet energy efficiency standards and is accompanied by an individual data sheet with specifications and test results.
FAQs
The time depends on the scope of work and the complexity of the project. On average, window replacement in a typical apartment can take 1-2 days. For a private house, the process may take 3-5 days. However, large or complex projects may require more time. It is better to discuss exact terms with our managers.
Yes, it can be done at any time of the year, including winter. Modern technology and materials allow work to be carried out even at low temperatures. However, winter installation requires additional precautions and may take a little longer. The advantage of winter replacement is the ability to immediately assess the quality of the thermal insulation of the new windows.
The main signs that it’s time to upgrade your windows:
- Drafts and heat loss.
- Condensation between the panes.
- Difficulty opening and closing.
- Visible damage to frames or glass.
- Increased noise from the street.
- Significant increase in heating bills.
Yes, quality replacement windows can increase property values. New energy efficient windows make a home more attractive to potential buyers because they promise savings on utility bills and increased comfort. By some estimates, replacing windows can increase property values by 5-10%.
Usually the windows themselves (profile and double-glazed units) are guaranteed for 3 to 5 years. The installation work is usually guaranteed for 1 to 3 years.
